Hydrolysis of (CH3)3Sn+ in Various Salt Media

The hydrolysis of trimethyltin(IV) has been studied by potentiometry (H⁺ -glass electrode) and calorimetry in various salt media (NaNO₃, NaCl, KCl, Na₂SO₄, and NaNO₃—NaCl mixtures). The effect of ionic strength on the hydrolysis constants is accounted for by a simple Debye–Hückel type equation and by Pitzer equations. The results allow us to obtain H for hydrolysis and the temperature dependence of the Pitzer parameters. The resulting coefficients can be used to examine the speciation of (CH₃)₃Sn⁺ in multicomponent electrolyte solutions, such as natural waters, over a wide range of temperature and ionic strength.     

Trace element determination in vitamin E using ICP-MS

Vitamin E supplements are either isolated from plants sources or prepared synthetically. Isolation from plants includes eight different tocopherol structures. Vitamin E synthesis includes seven different stereoisomers, which involves the use of several catalysts that may lead to trace element contamination in the vitamin. The use of ICP-MS is an ideal technique for detecting these trace elements. However, the oily nature of the samples requires the development of a sample preparation methodology. This study was done upon the request of synthetic vitamin E manufacturers to test the trace metal purity of their samples. In this work, the comparison of an acid microwave digestion and emulsion preparation is discussed. Cromium, nickel, tin and lead were found in the synthetic vitamin E analyzed and 200, 60, 9 and 45 ppb were the concentrations found respectively for these elements.Digesting the samples gives slightly lower detection limits compared to the emulsion preparation.     

Elektronentransfer und Ionenpaar-Bildung. 40. Mitteilung. Einkristall-Struktur von Bis(Natrium-1,1′-Biphenyl-2-thiolat-Diglyme): Ein Zwischenprodukt der reduktiven Ringöffnung von Dibenzothiophen

Electron Transfer and Ion Pair Formation Single Crystal Structure of Bis(sodium 1,1′-biphenyl-2-thiolate-diglyme): An Intermediate in the Reductive Ring Opening of Dibenzothiophene On Na-metal reduction of dibenzothiophene, the five-membered sulfur ring opens to form a colorless 1,1′-biphenyl-2-thiolate sodium salt, which, according to its single-crystal structure determination, is a dimer containing a four-membered, twice diglyme-solvated ring (diglyme···Na^⊕?SR)₂. Additional measurements provide the following information: cyclic voltammetry in aprotic MeCN solution shows one quasi-reversible electron transfer at E = ?2.58 V. The dibenzothiophene radical anion can be generated in aprotic THF solution at a K mirror and characterized by an 81-line ESR spectrum and its simulation. This blue species is also the first UV/VIS detectable one before the solution changes via green (due to blue + yellow color mixing) to yellow, yielding across an isosbestic point a second and diamagnetic compound. All of the above results suggest a consecutive two-electron reduction followed by an intersystem protonation, M + (e^?) → M^.? (blue) + (e^?) → (M^??, yellow?) + (H^⊕) → MH^? (colorless), to yield the crystallized and structurally characterized reaction intermediate. The diglyme-solvated sodium-salt dimer provides a basis for a quantum-chemical discussion of some facets of the most likely microscopic reduction pathway.     

CO(2) Fixation by Novel Copper(II) and Zinc(II) Macrocyclic Complexes. A Solution and Solid State Study

Solutions containing Zn(II) and Cu(II) complexes with [15]aneN(3)O(2) rapidly adsorb atmospheric CO(2) to give {[ZnL](3)(&mgr;(3)-CO(3))}.(ClO(4))(4) (2) and {[CuL](3)(&mgr;(3)-CO(3))}.(ClO(4))(4) (4) complexes. The crystal structures of both complexes have been solved (for 2, space group R3c, a, b = 22.300(5) ?, c = 17.980(8) ?, V = 7743(4) ?(3), Z = 6, R = 0.0666, R(w)(2) = 0.1719; for 4, space group R3c, a, b = 22.292(7) ?, c = 10.096(8) ?, V = 7788(5) ?(3), Z = 6, R = 0.0598, R(w)(2) = 0.1611), and the spectromagnetic behavior of 4 has been studied. In both compounds a carbonate anion triply bridges three metal cations. Each metal is coordinated by one oxygen of the carbonate, three nitrogens, and an oxygen of the macrocycle; the latter donor weakly interacts with the metals. Although the two compounds are isomorphous, they are not isostructural, because the coordination geometries of Zn(II) in 2 and Cu(II) in 4 are different. The mixed complex {[CuZn(2)L(3)](&mgr;(3)-CO(3))}.(ClO(4))(4) has been synthesized. X-ray analysis (space group R3c, a, b = 22.323(7) ?, c = 17.989(9) ?, V = 7763(5) ?(3), Z = 6, R = 0.0477, R(w)(2) = 0.1371) and EPR measurements are in accord with a &mgr;(3)-carbonate bridging one Cu(II) and two Zn(II) ions in {[CuZn(2)L(3)](&mgr;(3)-CO(3))}(4+). Both the Zn(II) and Cu(II) cations exhibit the same coordination sphere, almost equal to that found in the trinuclear Zn(II) complex 2. The systems Zn(II)/L and Cu(II)/Lhave been studied by means of potentiometric measurements in 0.15 mol dm(-)(1) NaCl and in 0.1 mol dm(-)(3) NaClO(4) aqueous solutions; the species present in solution and their stability constants have been determined. In both systems [ML](2+) species and hydroxo complexes [M(II)LOH](+) (M = Zn, Cu) are present in solution. In the case of Cu(II), a [CuL(OH)(2)] complex is also found. The process of CO(2) fixation is due to the presence of such hydroxo-species, which can act as nucleophiles toward CO(2). In order to test the nucleophilic ability of the Zn(II) complexes, the kinetics of the promoted hydrolysis of p-nitrophenyl acetate has been studied. The [ZnLOH](+) complex promotes such a reaction, where the Zn(II)-bound OH(-) acts as a nucleophile to the carbonyl carbon. The equilibrium constants for the addition of HCO(3)(-) and CO(3)(2)(-) to the [ZnL](2+) complex have been potentiometrically determined. Only [ML(HCO(3))](+) and [ML(CO(3))] species are found in aqueous solution. A mechanism for the formation of {[ML](3)(&mgr;(3)-CO(3))}.(ClO(4))(4) is suggested.     

Host-guest antenna materials

The focus of this review is on host-guest composites with photonic antenna properties. The material generally consists of cylindrical zeolite L crystals the channels of which are filled with dye molecules. The synthesis is based on the fact that molecules can diffuse into individual channels. This means that, under the appropriate conditions, they can also leave the zeolite by the same way. In some cases, however, it is desirable to block their way out by adding a closure molecule. Functionalization of the closure molecules allows tuning of, for example, wettability, refractive index, and chemical reactivity. The supramolecular organization of the dyes inside the channels is a first stage of organization. It allows light harvesting within a certain volume of a dye-loaded nanocrystalline zeolite and radiationless transport to both ends of the cylinder or from the ends to the center. The second stage of organization is the coupling to an external acceptor or donor stopcock fluorophore at the ends of the channels, which can trap or inject electronic excitation energy. The third stage of organization is the coupling to an external device through a stopcock molecule. The wide-ranging tunability of these highly organized materials offers fascinating new possibilities for exploring excitation-energy-transfer phenomena, and challenges for developing new photonic devices.     

Hydrous ferric oxide: evaluation of Cd-HFO surface complexation models combining Cd(K) EXAFS data,potentiometric titration results,and surface site structures identified from mineralogical knowledge

The surface properties of ferrihydrite were studied by combining wet chemical data, Cd(K) EXAFS data, and a surface structure and protonation model of the ferrihydrite surface. Acid-base titration experiments and Cd(II)-ferrihydrite sorption experiments were performed within 3<-log[H(+)]<10.5 and 0.5<[Cd(t)]<12 mM in 0.3 M NaClO(4) at 25 degrees C, where [Cd(t)] refers to total Cd concentration. Measurements at -5.5triple bond Fe-OH(-1/2),logk((int))=-8.29, assuming the existence of a unique intrinsic microscopic constant, logk((int)), and consequently the existence of a single significant type of acid-base reactive functional groups. The surface structure model indicates that these groups are terminal water groups. The Cd(II) data were modeled assuming the existence of a single reactive site. The model fits the data set at low Cd(II) concentration and up to 50% surface coverage. At high coverage more Cd(II) ions than predicted are adsorbed, which is indicative of the existence of a second type of site of lower affinity. This agrees with the surface structure and protonation model developed, which indicates comparable concentrations of high- and low-affinity sites. The model further shows that for each class of low- and high-affinity sites there exists a variety of corresponding Cd surface complex structure, depending on the model crystal faces on which the complexes develop. Generally, high-affinity surface structures have surface coordinations of 3 and 4, as compared to 1 and 2 for low-affinity surface structures.     

Comparison of three sequential extraction procedures (original and modified 3 steps BCR procedure) applied to sediments of different origin

The 3 steps sequential extraction procedure proposed by the Standards Measurements and Testing program (SM&T--formerly BCR) of the European Union has been applied for the speciation of metals in sediments. Results obtained by the application of the BCR standardized procedure were compared to those of two four step sequential extraction procedures, which are different from the BCR procedure only for the introduction of an additional step with NaOCl, as 2nd and 3rd step respectively. Five different metals have been taken into consideration: Cd, Cu, Ni, Pb and Zn. The analytical performances of the laboratory have been evaluated using three certified reference materials: the BCR 601 lake sediment for the BCR sequential extraction procedure, PACS-1 and MESS-1 for total metal concentration. Results showed that the efficiency of NaOCl treatment is higher or at least equal to that of H2O2 treatment and that its selectivity is quite satisfying. Moreover the NaOCl treatment doesn't significantly influence the extraction of the easily reducible fraction.     

Bulky Arylgallium and Indium Derivatives with Co(CO)4 and Mn(CO)5 Substituents

Further investigation of the reaction of Ar*GaCl₂ (Ar* = 2,4,6-t-Bu₃C₆H₂) with Na[Mn(CO)₅] resulted in the new compound, [Ga(Ar*){Mn(CO)₅}₂] 2 . The new indium compounds, [In(Ar*){Co(CO)₄}₂] 3 and [In(Ar*){Mn(CO)₅}₂] 4 , have been prepared by the treatment of Ar*InBr₂ with Na[Co(CO)₄] and Na[Mn(CO)₅], respectively. The structure of 3 was established by single-crystal X-ray diffraction: space group P1 (No. 2), Z = 2, a = 8.625(1) Å, b = 10.557(2) Å, c = 17.55(2) Å, α = 88.43(1)°, β = 83.45(1)°, γ = 71.14(1)°. The X-ray crystal structure of [Ga{Mn(CO)₅}₃] is also reported: space group Pbca (No. 61), Z = 8, a = 12.83(3) Å, b = 11.753(2) Å, c = 29.662(6) Å, α = β = γ = 90°.     

2-Mercaptomethyl-thiazolidines use conserved aromatic–S interactions to achieve broad-range inhibition of metallo-β-lactamases

Infections caused by multidrug resistant (MDR) bacteria are a major public health threat. Carbapenems are among the most potent antimicrobial agents that are commercially available to treat MDR bacteria. Bacterial production of carbapenem-hydrolysing metallo-β-lactamases (MBLs) challenges their safety and efficacy, with subclass B1 MBLs hydrolysing almost all β-lactam antibiotics. MBL inhibitors would fulfil an urgent clinical need by prolonging the lifetime of these life-saving drugs. Here we report the synthesis and activity of a series of 2-mercaptomethyl-thiazolidines (MMTZs), designed to replicate MBL interactions with reaction intermediates or hydrolysis products. MMTZs are potent competitive inhibitors of B1 MBLs in vitro (e.g., K_i = 0.44 μM vs. NDM-1). Crystal structures of MMTZ complexes reveal similar binding patterns to the most clinically important B1 MBLs (NDM-1, VIM-2 and IMP-1), contrasting with previously studied thiol-based MBL inhibitors, such as bisthiazolidines (BTZs) or captopril stereoisomers, which exhibit lower, more variable potencies and multiple binding modes. MMTZ binding involves thiol coordination to the Zn(ii) site and extensive hydrophobic interactions, burying the inhibitor more deeply within the active site than d/l-captopril. Unexpectedly, MMTZ binding features a thioether–π interaction with a conserved active-site aromatic residue, consistent with their equipotent inhibition and similar binding to multiple MBLs. MMTZs penetrate multiple Enterobacterales, inhibit NDM-1 in situ, and restore carbapenem potency against clinical isolates expressing B1 MBLs. Based on their inhibitory profile and lack of eukaryotic cell toxicity, MMTZs represent a promising scaffold for MBL inhibitor development. These results also suggest sulphur–π interactions can be exploited for general ligand design in medicinal chemistry.

Metallo-β-lactamases (MBLs) are major culprits of resistance to carbapenems in bacteria. A series of thiazolidines are potent MBL inhibitors, restoring the activity of carbapenems. Metal binding and sulphur–π interactions are key to inhibition.